Personal menu

Dosing Pots & Dirt/Air Separators

Dosing pots are installed in a heating or cooling system to allow rapid introduction of water treatment safely for the prevention of sludge, limescale and corrosion. The ideal location is where there is a high differential pressure between the flow and return pipework or heaters. The range has both mild steel and stainless steel material construction options, supplied fully assembled ready for installation on site. A non return valve has been fitted for additional safety due to its anti flash protection.

The range of separators available from SBS are designed to automatically remove dirt and air from heating, cooling and process systems, ensuring optimum performance of your equipment at all times. These can be installed in all buildings and even retro-fitted into existing systems, to provide economic and environmental benefits. Installation can be done on any sizeable open or closed loop system, including chilled water systems, condenser water systems, and process water systems.

View as Grid List

Sort by

Display per page

1 1/4-1 1/2"McAlpine Pipe Clamp Grey

MTCLAMP1GR

1.1/4" - 1.1/2" McAlpine ASA Plastic Pipe Clamp Grey. Universal Connections for 19/23mm rigid pipe and 25mm flexible pipe - CLAMP1GR

£21.76 ex VAT

1 1/2" McAlpine Multi-Fit Non-Return

MTT28MNRV

1.1/2" McAlpine Plastic Multifit In-Line Non-Return Check Valve - T28M-NRV

£20.88 ex VAT

1 1/4" Mcalpine In-line Vertical Non Return Valve

MTCONVALVE-125

1.1/4" Mcalpine Convalve In-line Vertical Non Return Valve with Universal Connection - CONVALVE-125

£21.53 ex VAT

1 1/4" Mcalpine In-line Vertical Non Return Valve Plain Tail

MTCONVALVE-125P

1.1/4" Mcalpine Convalve In-line Vertical Non Return Valve with Plain Tail and Universal Outlet - CONVALVE-125P

£20.88 ex VAT

11/4" McAlpine In-Line Non-Return Valve

MTS28MNRV

1.1/4" McAlpine Multifit In-Line Non-Return Valve with top access for cleaning - Universal Connnections, must be installed in the horizontal position - S28M-NRV

£18.76 ex VAT

3/4" Mcalpine In-line Vertical Non Return Valve

MTCONVALVE

3/4" McAlpine In-Line Vertical Non-Return Valve with inlet and outlet connection for 19/23mm pipe - CONVALVE

£17.45 ex VAT

1 1/4" McAlpine Macvalve Self Closing Waste Valve

MTMACVALVE-1

1.1/4" McAlpine Macvalve Plastic Self-Closing Waste Valve - MACVALVE-1

£38.15 ex VAT

1 1/4" McAlpine Macvalve Self Closing Waste Valve c/w Tundish Adaptor

MTMACVALVE-3

1.1/4" McAlpine Macvalve Plastic Self-Closing Waste Valve With Tundish Adaptor - MACVALVE-3

£51.56 ex VAT

2" McAlpine Macvalve Self Closing Waste Valve

MTMACVALVE-4

2" McAlpine Macvalve Plastic Self-Closing Waste Valve - MACVALVE-4

£45.79 ex VAT

One Piece tun dish with 19/23mm universal inlet x 1 1/4"outlet

MTTUN6

One-Piece Plastic Tundish with 19/23mm universal Compression Fittings Inlet x 1.1/4" Outlet - TUN6

£18.41 ex VAT

One Piece Tundish 3/4" Loose Nut In x 19/23mm Universal Out Chrome Plated

MTTUN4-CP

One Piece Chrome Plated Plastic Tundish With 3/4" Loose Nut Inlet 19/23mm Universal Compression Outlet - TUN4-CP

£31.77 ex VAT

One Piece Tundish With 3/4" Loose Nut Inlet 19/23mm Universal Outlet

MTTUN4

One Piece Plastic Tundish With 3/4" Loose Nut Inlet 19/23mm Universal Compression Outlet - TUN-4

£16.81 ex VAT

1 1/4" McAlpine Multi-Fit x Plain End Bend 90 MS4L

MTMS4L

1.1/4" McAlpine Multifit x Plain End 90° Street Bend. Plain end designed to fit in to other fittings or traps with a compression connection. Suits all plastic, copper and lead pipe. Manufactured in Polypropylene - MS4L

£4.14 ex VAT

1 1/4" McAlpine Multifit x Plain End Bend 45 MS20L

MTMS20L

1.1/4" McAlpine Multifit x Plain End 45° Street Bend. Plain end designed to fit in to other fittings or traps with a compression connection. Suits all plastic, copper and lead pipe. Manufactured in Polypropylene - MS20L

£3.81 ex VAT

1 1/2" McAlpine Macvalve Self Closing Waste Valve

MTMACVALVE-2

1.1/2" McAlpine Macvalve Plastic Self-Closing Waste Valve - MACVALVE-2

£38.15 ex VAT

1 1/2" X 1 1/4" McAlpine Straight Reducing Coupling

MTST28M

1.1/2" X 1.1/4" McAlpine Straight Reducing Connector. Suits all plastic waste, copper and lead pipes. Manufactured in Polypropylene - ST28M

£5.11 ex VAT

1 1/2" McAlpine Bent Nozzle For Connection To Multifit WMF4

MTWMF4

1.1/2" McAlpine 90° Nozzle For Connection To Multifit. Manufactured in polypropylene - WMF4

£2.07 ex VAT

1 1/2" McAlpine Multifit x Plain Bend 90 MT4L

MTMT4L

1.1/2" McAlpine Multifit x Plain End 90° Street Bend. Plain end designed to fit in to other fittings or traps with a compression connection. Suits all plastic, copper and lead pipe. Manufactured in Polypropylene - MT4L

£4.35 ex VAT

1 1/2" McAlpine Straight Conn Multifit x BSP Coupling Nut T29-LN

MTT29LN

1.1/2" McAlpine Straight Connector Multifit x BSP Coupling Nut. Suits all plastic waste, copper and lead pipes. Manufactured in Polypropylene - T29-LN

£4.20 ex VAT

1 1/2" McAlpine Straight Nozzle For Connection To Multifit WMF3

MTWMF3

1.1/2" McAlpine Straight Nozzle For Connection To Multifit. Manufactured in polypropylene - WMF3

£2.07 ex VAT