Personal menu

Dosing Pots & Dirt/Air Separators

Dosing pots are installed in a heating or cooling system to allow rapid introduction of water treatment safely for the prevention of sludge, limescale and corrosion. The ideal location is where there is a high differential pressure between the flow and return pipework or heaters. The range has both mild steel and stainless steel material construction options, supplied fully assembled ready for installation on site. A non return valve has been fitted for additional safety due to its anti flash protection.

The range of separators available from SBS are designed to automatically remove dirt and air from heating, cooling and process systems, ensuring optimum performance of your equipment at all times. These can be installed in all buildings and even retro-fitted into existing systems, to provide economic and environmental benefits. Installation can be done on any sizeable open or closed loop system, including chilled water systems, condenser water systems, and process water systems.

View as Grid List

Sort by

Display per page

1 1/4" McAlpine Straight Through Anti Syphon (Pedastel) Trap

MTX10V

1.1/4" McAlpine Straight Through Anti-Syphon Trap (Silentrap). Multifit Compression Outlet, 75mm Water Seal. Anti-Syphon Valve neutralises negative syphonic pressure and eliminates gurgling. Suitable for all plastic, copper and lead pipe. Manufactured in Polypropylene - X10V

£15.61 ex VAT

11/2" McAlpine BSP Female x Male Trap Extension Piece T12A-F

MTT12AF

1.1/2" McAlpine Plastic BSP Female x Male Trap Extension Piece - T12A-F

£2.80 ex VAT

2" McAlpine Multifit Adjustable Str Conn

MTMZ18E

2" McAlpine Multifit Adjustable Straight Connector. Suits all plastic waste, copper and lead pipes. Manufactured in Polypropylene - MZ18E

£7.25 ex VAT

2" McAlpine Tundish with 19/22mm Outlet

MTTUN2

2" McAlpine Multifit Reducing Tundish with 19/23mm Universal Outlet. Plain end fits into other fittings or traps with a compression connection. Suits all plastic waste, copper and lead pipes. Manufactured in Polypropylene - TUN-2

£6.76 ex VAT

2" McAlpine x 2" BSP Female Multi-Fit Connector Z29

MTZ29

2" McAlpine Multifit Straight Connector x BSP Female thread. Suits all plastic, copper and lead pipe. Manufactured in Polypropylene - Z29

£4.77 ex VAT

35 x 1 1/4" McAlpine ABS Sol Weld Adaptor

MTABSCON-35X1.25

McAlpine 35mm x 1.1/4" Solvent Weld Adaptor. ABS Solvent Weld Adaptor to convert Chrome Plated Brass Compression Fittings to plastic solvent weld waste pipe. Use with McAlpine CP Brass Waste Pipe and Fittings - ABSCON-35X1.25

£1.92 ex VAT